[wdp67]

I have the parallel port version of this same box and VFD, Can anyone help me to get my spindle working with Mach3 please?

Thanks

Walt

[Nleo22]

I have the parallel port version of this same box and VFD, Can anyone help me to get my spindle working with Mach3 please?

Thanks

Walt

There are video on first page, or https://www.youtube.com/watch?v=lncconN83G4
One yoy don't setup your vfd, go to mdi section and input code m3 s7700

[wdp67]

Do I have to have something in ports and pins set because I have tried that, because I have tried using the MDI and get nothing?

Thanks

[Dean Elliott]

In an effort to consolidate all of the 6040 and 6040z threads please post here: http://www.cnczone.com/forums/open-s...ml#post1790768

[Nleo22]

Do you guys know what going help me. I start me spindle m3 s24000, at max. Motor run pretty good. But on mach3 under RPM at 0 "zero" ??? Does this nowforever E-100 vfd pick up rpm sensor??? Or it doesn't have one. I don't get it, motor work but no rpm ?