Not on that machine.
If you assume that the half steps of a micro stepped drive are reasonably precise (the microsteps tend to be non linear) then it has a resolution of 0.05mm. There's more flex in that little machine than that..
View Poll Results: How fast can your Homemade CNC cut?
- Voters
- 639. You may not vote on this poll
-
less than 10 IPM (4.2mm/s)
45 7.04% -
10-50 IPM (4.2 - 21 mm/s)
186 29.11% -
50-100 IPM (21-42 mm/s)
145 22.69% -
100 - 300 IPM (42 - 127 mm/s)
157 24.57% -
300 - 600 IPM (127 - 254 mm/s
54 8.45% -
faster than 600 IPM (254 mm/s)
52 8.14%
Thread: How fast is your homemade CNC?
Results 1 to 20 of 95
Hybrid View
-
11-05-2015, 09:41 AM #1
Registered
- Join Date
- Apr 2004
- Posts
- 65
Re: How fast is your homemade CNC?
Reply With QuoteSimilar Threads
-
delrin. how fast is too fast?
By justanotherguy in forum Glass, Plastic and StoneReplies: 3Last Post: 02-24-2011, 04:28 AM -
Lazy Cam not posting Fast Travel as Fast Travel
By astainless in forum Uncategorised CAM DiscussionReplies: 0Last Post: 02-24-2010, 09:31 PM -
homemade cnc
By taylormade in forum DIY CNC Router Table MachinesReplies: 1Last Post: 11-26-2008, 01:55 PM -
Homemade (diy) CMM arm?
By hotponyshoes in forum Digitizing and Laser DigitizingReplies: 2Last Post: 05-27-2007, 05:25 PM -
Homemade THC
By nerginer in forum Mach Plasma / LaserReplies: 0Last Post: 02-23-2007, 10:58 AM
Tags for this Thread
Posting Permissions
