[antoni]

sorry for the long delay on the reply, I have not been online in a while, work and doing other things.
I have all the kit parts, the plates are all very well cut and the finish on them are great.
I now have the machine assembled and I am in the process of building my control box, mounting power supplies and controller board along with a few additions, extra relays for the cooling system, VFD and water pump. I will say they did have a mix up sending me my parts but Peter answered the phone and made the corrections with no problems after that.
The 80x80 rails are very strong, the ends are pre-threaded for the end plates, the machine goes together easy but is better if you have some help on a couple steps.
Any thing else you need let me know.

Thanks for that sorry for the long time the was on the same time i was writing for the container from china