X,Y,Z Working area: 580×380×60mm
Max. Feeding height: ≤100mm
Outside dimension: 880×660×520mm
Table size: 745×480mm
Lathe structure: 6061/6063 Aluminium alloy
Stepping motor: two-phase 57/3A
Drive unit: 1605 Ball screw
Sliding unit:: Chromeplate shaft
Maximum speed: 0-4000mm/min
Engraving speed: 300-3000mm/min
Repeat positioning Accuracy: 0.05mm
Spindle: 1500W VFD spindle motor
Spindle speed: 24000rpm
Cutting tool-holder: ER11/6mm and 3.175mm
Interface: Parallel port
Software Compatability: Mach3/Emc2,(Type3,Wentai, ArtCAM)
Command code: G code/.nc/.ncc/.tab/.txt
Weight: 55kg