I am very new to CNC. My boss and I manually moved our x axis completely to the right, X+ and got the over travel fault. We cannot find anywhere in the books how to change it enough to clear, reset then move X- and put the parameter value back.
I'm looking for a little help/direction on how to do it.
We moved it to repair the left side cover that got damaged in shipment.
Model is MC-4VAE, OSP5020
Thank you in advance.
Thread: X axis over travel fault.
Results 1 to 4 of 4
-
12-21-2015, 09:50 PM #1
Junior Member
- Join Date
- Dec 2015
- Posts
- 2
X axis over travel fault.
-
12-21-2015, 10:20 PM #2
Registered
- Join Date
- Sep 2009
- Posts
- 93
Re: X axis over travel fault.
welcome to the forum.
search will reveal lots of overtravel fixes
two threads from yours:
http://www.cnczone.com/forums/okuma/...ops-p200l.html
-
12-22-2015, 02:32 PM #3
Registered
- Join Date
- Dec 2015
- Posts
- 3
Re: X axis over travel fault.
parametter 700 in 99999999
-
12-24-2015, 02:50 AM #4
Junior Member
- Join Date
- Dec 2015
- Posts
- 2
Mkd. The thread you recommended helped us reset the fault and get us moving forward again. Thanks for the help. New to forums as well so learning as I go.
Reply With Quote
Posting Permissions
