Spindle with BT30 Tool Holder, which can be used for graphite engraving.
Spindle with BT30 Tool Holder, which can be used for graphite engraving.
Which kW is reached and which capabilities like Encoder to spindle and vfd Thx Thomas
Gesendet von iPhone mit Tapatalk
Hi Thomas,
The spindle is 5.5kw with 12000rpm. If you use encoder on this spindle, VFD-C inverter is needed?
Are you going to use this spindle? To work on what kind of material?
Catherine
question is it possible to have an encoder at spindle yes no and do you offer an vfd for it yes no and if yes may i have a link at the specs like 220 v how to control the speed and is there also an 2,2 kw version ? is it suiteable for steel ? speaking which kinds of bearing are in that thing 12 k sounds more like suiteable for wood and plastic
Gesendet von iPad mit Tapatalk
Hi Thomas,
Encoderok,
VFD-C,ok,
Speed change, ok,
220V, ok
bearing,NSK
2.2kw, ok
Could you tell us that you need ATC spindle or not?
What kind of machine will you use this spindle on? How is the intensity of the machine?
Waht kinf of work will you do on the steel? Tapping? Engraving?
For better communication, my skype is cnc06.roctech
Hi cathy,
Which tool head do you have at the atc ? We use on our machines ISO 30 and that is why we need encoder to supper tool orientation.
If customer want ATC they of course need tapping. I have seen on your page that you do routers and i have nit seen the Spindle
So do you buy it from another vendor or duo you do it yourself.
And the reason i ask is we do Vertical mills for steel and for the act version an ISO30 spindle is needed parallel i think of doing an router where an fast spindle may make sense as well
thomas
Hi Thomas,
We make cnc routers and buy spindle from other suppliers.
Most spindles on our machines are HSD air cooling spindle.
For this water cooling spindle, made in China,it is BT30 tool holder, different from ISO30.
Will you make a router by yourself?
Hi ,
in short yes we have vertical mills for steel which use ISO30 so the idea is to share tool pool
thx thomas