Does anyone know what post processor in bobcad v21 to use with turbocnc?
Thanks,
Does anyone know what post processor in bobcad v21 to use with turbocnc?
Thanks,
http://www.bobcad.com/index.php?select_page=posts_index
Check here they may have something for you. If they don't call and they will make one for you free of charge One benifit of being a BCC user Also BCC will customize a post processor for you, free of charge.
I saw two for Turbo CNC. One for Mills and the other for Lathes
As you get used to BCC you will learn to write your own post processors and write your own scripts to use with them.
:cheers:
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
Here is your post processor from the BCC website listed above. I do advise visiting their site. You can also join the BCC Forum.
http://216.117.147.20/bobcadsupport/forums/
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
Thanks for the info, I didnt realize they had post for these various programs. I tried the post but there where still problems. I plan to try mach2, maybe I will have better luck.
Call BobCad, they will help you with the post for FREE. They will even Custom Make a Post For you FREE of Charge. Post Here in the BobCad Forum or got to BobCad's Support Forum.
http://216.117.147.20/bobcadsupport/forums/index.php
They will help you make a post via phone or on the web via Viewer Support Tool.
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
you can also try Fanuc 6m simplified
Anyone have turbocnc post for bobcad v24 or fusion360? Please help me out