[AK47]

Hi.

I have to write here about EMCO PC TURN 50 lathe a have.

I have write to emco emails and send web baser reguests. But there is no response - none.

First i try to get this unit operational again, since it has lost pc and io-card somehow. As they seems to do every case

Dealer has change since 1995. In Finland there is no one who has repair these machines available anymore. Current dealer sell only model 60 and price is something 10000eur+. It is huge amount for lathe that can be used only for aluminium. So our scholl want real lathe to replace, so i get this unit for free. Later on i found io-card from ebay, but it has no connection. I was again contact to emco - same result than before, no one reply.

Emco was option when we buy new lathe, but not for real since there is no support when need. We get other manufacturer and now there is 50000eur lathe comming end of month

However, this small emco is useless now. Any help to get pc cable schematics? I have lathe and fanuc board, floppydisc where program installs, w98 pc with one ISA slot - there is that io-card now. Emco software works ok but lathe does not go reference or do anything.

[mleppanen]

Hi.

I have to write here about EMCO PC TURN 50 lathe a have.

However, this small emco is useless now. Any help to get pc cable schematics? I have lathe and fanuc board, floppydisc where program installs, w98 pc with one ISA slot - there is that io-card now. Emco software works ok but lathe does not go reference or do anything.

Do you still have these problems? We just got one running here in Finland and perhaps can help you.

[AK47]

Yes, machine has been as is since last time to try wake it up.

[DNukem]

Do you still have these problems? We just got one running here in Finland and perhaps can help you.

Retiree/CNC Student...
Just acquired an EMCO PC Turn 50 w/ GE Fanuk Series-O Board.
I believe it has the ACC upgrade (don't really know what that means...).
Got the ACC install instructions (Only literature that came with it.) and as near as I can tell the ACC has been installed.
No Install/Operation manuals, No CDs, No Media, No idea where to start.
Looking for any CDs, Manuals or Illustrations to get me going.
Please provide guidance, I will be eternally greatful.

[AK47]

mleppanen, you has not been here for long time, but i still has same problems.

[MauriH]

Do you still have these problems? We just got one running here in Finland and perhaps can help you.

Hi Leppänen,
I need help with EMCO PC 50 lathe here in Finland, urgently.
Terveisin
Mauri

[AK47]

Hi Leppänen,
I need help with EMCO PC 50 lathe here in Finland, urgently.
Terveisin
Mauri

I have emco pc turn50 with i/o card and software and manuals. However machine wont go to reference. And communication with pc/emco is not fully functional.

nollaviisnollakolmeneljäkolmeysineljäneljäkolme txt

[AK47]

There is need some help here too I have software disk and i/o card and cables, but machine is not going reference. Manuals is not helpful. So- any help?