I`m a graphic designer
Machinist
Engineer
Programmer
Sales Person
Management
Hobbyist
I`m a graphic designer
Application developer and gasoline powered helicopter modeller.
Sent from my GT-I9300 using Tapatalk 2
Totally agree that this is a great website, so that may people will visit it everyday, hope it will be better and better!!
ISweek(http://www.isweek.com/)- Industry sourcing & Wholesale industrial products
All of the above.
Great Site and has been for years!
Engineer/Scientist. I develop and design sterilization processes for disposable medical devices!
Bill
billyjack
Helicopter def. = Bunch of spare parts flying in close formation! USAF 1974 ;>)
I started as a hobbyist barely two years ago, and later it turned into a passion and made a sustainable career as a Machinist.
Started building acoustic guitars last year and thinking seriously about building a CNC router to assist in certain parts of the build process. I can see it being used mostly for building accurate forms, fixtures, and jigs (in my shop, at least) along with necks.
Hobbyist that wants to own a 4/4 wood router table in the future , with lots to learn . Luckily I found the smartest people on earth right here
I hang out in cnc zone since there's not really many of us here in our area that's tinkering with cnc's I dont wanna be like "lonely sam" and hopefully I can find a job overseas to unlock my full potential
Hi there, I'm programmer and machinist. Already doing CNC work with glass (Intermac Bevel 3200/4600 and Edge 1500/3000) for 13 years now. Most of the times I visit CNCzone is when I get a notification or when I'm in trouble. I love Intermac but when you get in trouble, there isn't really anything you can find that will help you on the web. CNCzone will help with the right people
It's all about teamwork
Development of CNC firmware/software for industrial CNC.
This forum is a so rich place of info...
CNC laser programmer,
CNC Operator, Maintenance and 2nd Shift Supervisor.
Currently furthering in-house training as a setup guy, and will likely attend formal HAAS training after the 3rd quarter.
Background: Small PCB electronics, Automation of large earthmoving equipment (Trimble). Hydraulic and Electrical engineering.
*CNC is actually new to me.
14 months experience and exposure.
I’ve been a technical service, repair and installer for about 30 years before walking into a CNC shop.
Using this site as a sound reference to answer my own questions and augment knowledge regarding the subject of CNC in all aspects.
“There’s the manuals, and various sources of text references... However this site provides a means of discussion in the reality of resolving issues you’re confronted with for which you won’t find through any other media.”
So it’s good.
When I tried to recover the CNCZone password, it redirected me to Industry Arena.
After password recovered, I can login to Industry Arena only. Every time I click something linked to CNCZone, CNCZone asks me to login, but I can not use Industry Arena account to login to CNCZone.
Does anyone know how to do that?
What about putting student up the list? I`m not an engineer - yet.
Machinist & Engineer & Programmer & Sales Person & Management & Hobbyist
http://cncmakers.com/cnc/controllers/CNC_Controller_System/CNC_Retrofit_Package.html
Machinist and CNC Supervisor of swing & graveyard shifts out of Lake Elsinore, CA
Never at my G28 because I always at work...repeat...30 lol