Quote Originally Posted by airbrush View Post
....seems to be finicky...sometimes it works and sometimes doesn't. I have to open and close mach, reload file and run it again until it works...
That would seem to indicate the screenset has a stability issue,have you thought of trying out Mach4 or the Calypso Ventures (Calypso Ventures, Inc.) screenset,($69 USD) that does tool offset probing and is a nicer screen IMHO, I have it on a 3x Mill that has an ATC and I can just fill the carousel with tools and run a small toolchange program and it will go through all the tools one by one and set the length offsets in the tool library for me, takes a few minutes and they are all done ready to be called by the program as required.
I have/can do one tool at a time just by using the MDI and inputting say T2 M06, that triggers the software to do the touch off for the tool.

Worth a look anyway

Regards
Rob
:rainfro: :rainfro: :rainfro: