The machine started slowing down and using more wire than normal and faulted on us a couple times with this message.
E02 P01?
So I loaded the Auto-Diagnostic software into the machine and the CNC control passed everything but the Generator Chain failed. Charmilles recently discontinued support for this machine and it’s been such a solid machine I don’t have any other service contacts for Charmilles.
Diagnostic Summary:
Attachment 309404
Error Details:
Attachment 309402
Attachment 309400
Attachment 309406
Generator Boards are:
852449 UPH1-2
852447 UP1-4 should be OK }
852447 UP1-4 should be OK } I have a spare and when cycling the three boards through every spot the errors never change.
Auto-Diagnostic Version: G-16
System Software: MK3.1B 1/24/97
Any help is appreciated,
John