I have never been to this show but I keep hearing that it is definitely worth checking out. Is this true? Does anyone know what it cost to attend the show?
Thanks in advance.
I have never been to this show but I keep hearing that it is definitely worth checking out. Is this true? Does anyone know what it cost to attend the show?
Thanks in advance.
Yes it is well worth it! The price to attend is $45 if you pruchase by 8/16/16 and $65 after that.
It depends on what you do, and if you need to see other Technology, that may be your competition is using, if you have any, you need at least 2 days to get around it all, you can get lots of samples that you can try out in your own shop, is it worth it, yes it is to me, if you want just a one day trip, then Do a plan, of what you want to look at, cost is under $50 if you register early, if you are not a US citizen, and have a foreign passport it is Free
Mactec54
I went to the show in 2014, thoroughly enjoyed it !
So much to see.
However, I only planned for 2 days, so I felt like i was rushed.
This year I will spend 3 days there.
I am fortunate enough that my company is sending me this year. I am really looking forward to it. I believe we are going for at least 4 if not 5 days. Any must see thins there???
The software department alone is impressive. The CAD/CAM is becoming more app and cloud based that you can run from virtually any device. IMTS has many booth with automation and robotics. The networking with people is worth the time and money for sure! If you are interested in seeing how things are made in todays world this is a great show to be at. Also i will be at booth #236555 if you would like to learn how your business can succeed with laser cutting and engraving.
IMTS is the biggest of shows, if you really want to take the whole show in plan for days of walking. but you really do find just about every vendor for manufacturing related in one show.
if you go stop by our Booth Booth: 133100 CIMCO Americas. we are DNC, Data collection revision control software.We are also know for one of the if not the most known Editor for your Cad-Cam software.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .