I just acquired a 1995 Fanuc Robodrill T10B with 16mb controls. It has a 8.4" LCD that has issues. When turn on the machine the right side of the screen is pink. The left side looks good. After 5 min or so the right side starts to show text but flickers allot. Another couple minutes and the screen evens out mostly. There is a distinct shading down the middle of the screen and the right side is slightly blurry. Any suggestion of what to look at and how to fix? I re-seated all the cables. The soft buttons seem to work. All seven main screens work. Just the display is wonky.
Donny