I need to make and/or have made a die set that holds 28xx punches and dies made by CE Tooling in a single station setup. They are the same type used in WA Whitney presses.
Both the punch and die holders must be indexable to 1 or 5° increments throughout 360°.
My die space is 2-1/2ft L-R and 1-1/2ft F-B.
I have a DWG/DXF of a die set that would be good to use as the base platform of the design.
Gregory Bowne
Seattle, WA
[email protected]
Thread: 28xx Die Set
Results 1 to 5 of 5
-
08-14-2006, 07:39 PM #1
Registered
- Join Date
- Mar 2005
- Posts
- 816
28xx Die Set
-
08-16-2006, 02:40 PM #2
Registered
- Join Date
- May 2005
- Posts
- 90
upload your drawings
-
08-17-2006, 02:15 AM #3
Registered
- Join Date
- Mar 2005
- Posts
- 816
Drawings coming real soon.. have to update it as there is 3 minor changes that have to be done yet.
Greg
-
08-17-2006, 02:21 AM #4
Registered
- Join Date
- Mar 2005
- Posts
- 816
Drawings coming real soon.. have to update it as there is 3 minor changes that have to be done yet.
Greg
-
03-17-2007, 07:20 AM #5
Registered
- Join Date
- Mar 2007
- Posts
- 2
Is anybody here have experience in Semicon Tooling Industry?
Reply With Quote
Posting Permissions
