Re: RF45 (MSC branded) with Ajax retrofit
Working on adding a PDB, so I will need to make some new brackets to mount my motor. I will most likely make them at work, so I do not have to put mine back together with the old brackets, only to have to take it back apart again to swap them out.
I printed the back half of the brackets to make sure everything fits and clears properly.
I need to drill and tap my top plate to accept the new brackets. Then I can bolt on the printed brackets and make sure everything looks right with the motor in place.
And I need to design the plates for the PDB.
Work: Hurco VMX42/VMX50 - Shopsabre 4896 - Bobcad V4 4axis pro
Home: RF45 with Ajax CNC Controller - Bobcad V27 3 axis pro