Hi !
Our Amada Pega 357 with Fanuc 04PC Controller was set to 0+Delete+Power on, clearing all parameters.
Now the machine is not booting up, and alarm 100, 417 and 427, no lights on panel side.
The problem is that I cannot enter parameters, e.g. I can use N 005 to go to parameter No. 5 but cannot use P 00010 to enter its value.
Also I cannot change PC parameters.
Edit Protect is Off, but there is no light on Edit / MDI mode etc.
Please help URGENTLY !!
Thanks,
Ajay