We use Kluber GL261, and our automatic lubrication greases them every 3 hours of run time.
We also have a ballscrew with a spinning nut, that get's greased once/week.
We use Kluber GL261, and our automatic lubrication greases them every 3 hours of run time.
We also have a ballscrew with a spinning nut, that get's greased once/week.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)