PaulGB
This will get you running, do the RESET First then set the Parameter in this list, some are Default so don't need changing, I will check if there is anything other Parameters to change later today, just take your time, it's quite easy once you get to understanding the keyboard
Mactec54
Pr.76=10 ( This is for Factory RESET )
Pr.00=00 ( 04 for Pot use )
Pr.01=00
Pr.03=400
Pr.04=400
Pr05=220v ( Default )
Pr.10=10 ( Default Adjust to suit Acceleration )
Pr.11=10 ( Default Adjust to suit Deceleration )
Pr.24=01
Pr.26=100
Pr.27=100
Pr.37=100
Pr.52=9 ( Max Amps )
Pr.148=02 ( Number of Poles )
( Auto Tune After these Parameters have been Set )
Pr.103=02 ( Auto Tune )