Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.
Hi there,
link is on the youtube video page.... along with link to chinese heightmap distribution site..
have found a few other useful FREE apps here and there.. including dedicated lithophane app.... these are very popular with the 3D printing chaps...
will be some new examples at youtube soon...
hope it helps
TTFN
Danny
If they worked at it, they could probably make the Image 2 Stl Converter video even more annoying.
It looks like it could be a very useful tool, but gads, the audio for the video is extremely off-putting.
I am downloading the program. I hope the program is better than the video.
Most of those models look to be exactly the same as the ones floating around all the ebay sellers, and on the various file sharing places (which means they simply compiled them all I would fairly assume), the fact they also sell lists of thousands of names/email addresses of cnc users for $100 is something I would consider a fair indication of the motives and operation of the site.
cheers, Ian
It's rumoured that everytime someone buys a TB6560 based board, an engineer cries!
Ok so the thing I want to do is make a depth map ,(first pic) I grabbed this one put it in the stl converter and then in mesh lab (second pic) so this is what the carved one should look like however I can't find a depth map converter that is to say easier than a 3 hour journey for me any way still searching ,cheers John.
Hi there,
Another little Gem,
https://www.youtube.com/watch?v=XQ3fVmDtxAg
Hope it helps
TTFN
Danny
What one man can do another man can do..
BitMaps to Models, 3D2Relief, tutorials and FREE CNC Software http://cnc4free.org
Thks for sharing @_# !!
"@_# !!"
Is this some kind of Canadian slang ??
Translation please...
TTFN
What one man can do another man can do..
BitMaps to Models, 3D2Relief, tutorials and FREE CNC Software http://cnc4free.org
@_#....no slang !!....a simple, yet quite friendly intended....... different wink ....
My problem is still getting the depth map or rather how to generate it .
It's really not that difficult... See
https://www.youtube.com/playlist?lis...wpGRLHAp3tsy6N
Hope it helps
Danny
What one man can do another man can do..
BitMaps to Models, 3D2Relief, tutorials and FREE CNC Software http://cnc4free.org
Dear my Friends!
An information:
On Hobby , 3D, Relief, CNC, fafarag we have temporary problem with sending reliefs.
I'm work on it.
I hope it will work properly at 2016.07.17
Have a nice day!
Peter
Attachment 339648 Any help converting to dxf or dwg. When I use inkscape it is pretty sloppy. I played with the trace settings but get it cleaned up. An explanation or what software used would be appreciated thanks!
Can't find these on the sight.