Tool Library...adding endmills that have a larger shaft diameter than cutter end....
I have 1/16 endmills that have an 1/8 shaft....so cutting length is 0.25 OAL is 1.5...but there is an 1/8 taper from the shaft to the cutting end...
Adding a tool as endmill doesnt give you options for different diameters end/shaft....looks like center drill has these options....so i guess set up these endmills as center drill then?
Shouldn't affect anything should it? would just like a more accurate simulation of the tool.
and once i create my added tools i just save the toolcrib file??