Simple Dog Bowl Stand
Attachment 328814
Simple Dog Bowl Stand
Attachment 328814
Custom replacement knobs for a 1820 dresser. I could not find a picture of the finished dresser, my sister had me do this little job and sold the dresser in her antique store two days later. This required machining both sides of the board, you can see the holes for the tooling pins in the middle of the board for flipping it and getting it all aligned, worked pretty good.
Attachment 328816
Attachment 328818
Attachment 328820
The last thing I made was a box, I wanted to try using inventables Easel software, I used the box making app. The default for the toolpath was on the line which caused the gaps that the joints. Cut out question marks which are stuck on to give a Mario mystery box theme for storing WII controllers etc. Size is 25cm cube
I'll get it finished sometime after I start it.....
Thanks fretman and devastator!
I had built three nylon string guitars, the first (which was my first guitar) an archtop round-hole, and two thinline crossovers - one Les Paul shaped archec top, and another Tele-shaped... long before I started cutting parts with my CNC.
Attachment 328854
Attachment 328856
Can't find the Tele style pic....
Steve,
Those are amazing, very nice work.
Russ
Amazing engines stevehuckss396...beautiful too!