Dear All,
I have recently bought a CNC 1224 for woodwork from China. I am facing an issue with engraving and even my bits reaching the MDF. I have installed all the electric work and the machine starts fine, goes to REF point great. My machine starts engraving inches away from the material. Let me explain the steps and see if i am missing any.
1. Turn on machine
2 go to REF point (homing)
3. move machine to materials and press XY=0 and Shift + 0 to clear Z.
4. when i press the play button the machine moves but the BIT DOES NOT reach the table or the material so it basically engraving on airl
PLEASE HELP!