https://youtu.be/f7M3SAN1iCw
- - - Updated - - -
https://youtu.be/XL9gX4QeNSU
https://youtu.be/f7M3SAN1iCw
- - - Updated - - -
https://youtu.be/XL9gX4QeNSU
XZero cnc
XZero cnc
Hi RC, that machine you have in picture is the low cost machine. it will be sold by Inmotion cnc www.inmotioncnc.com and they will have up shortly. Here is some final parts i will post on this thread but soon they will have in the DIY forum i think .
from 20x20 inch to 20x20 foot
Attachment 336852
Attachment 336854
1 inch upright by 8 inch wide for 25mm blocks and Nema 34
Attachment 336856
Attachment 336858
Attachment 336860
Attachment 336862
Attachment 336864
XZero cnc
Predator and Demon are like this with covered profile,Predator 25 and 37 machines are all finished except covered profile keeps getting tweaks to die . i should have finished next week the inal of profile. Demon machines will still be a little longer yet
Attachment 336866
Attachment 336868
XZero cnc
Able to attach 2 ballnuts to each upright and Y axis plate or single
Attachment 336870
XZero cnc
After 9 months, I finally got my motors wired up. The problem is the motors on my Raptor are humming/buzzing loudly (and don't stop making noise) as soon as I plug them in. The motors do run though they seem to get a little hot I'm using a MX4600 with HS23B30A motors. The switches are set at: (Sw1-S6) On, Off, Off, Off, On, Off. What am I doing wrong?
Hi , i have not heard of the MX4660 making a sound, but some of the MX3660 i have heard like that. You can contact chris at leadshine Chris Li [email protected] and he will help you with the noise problem. Is it all the motors or just one?
XZero cnc
Things have been pretty quiet around here lately.
There is no action on the new In Motion web site.
How are the high end machines coming. Are the extrusions working out?
Thank you.
The 4X4 to 6x12 LC machines have been selling for couple weeks as pre-sale .
Attachment 339946
Some info here on someone setting one up
http://www.cnczone.com/forums/diy-cn...ine-build.html
XZero cnc
The Predator machines are now for sale as profile is how it should be now.
Demon 4x4 4x8 machines will be a little while yet
Last run of profile finally worked out after 8 months of reworking die.
2 x 300 foot runs in photo.
Attachment 339948
XZero cnc
woo!
looks shiny.
Here's a shot of the assembled gantry that's been hard anodized black
Attachment 340542