Lenny
When you open the new V29 software there is an option to select either a new document or an existing one, select a new document and on the list on the left select "Mill Turn" and BobCAD will automatically set a default Mill Turn Post Processor for you, there is a drop down list you can select from or you can right click on the one shown and then select from the PP library, there are 8 Post Processors in there so I don`t see why you would have to buy one.
Try speaking to BobCAD direct
Not being familiar with Mill Turn machines but it looks to me that the PP BC_2T_2S_5xBCPst would cover what you need, I am guessing that PP covers 2 turning turning heads for 2 spindles with 5 axis which should cover driven tools I would think
Regards
Rob
:rainfro: :rainfro: :rainfro: