[giomar]

Attachment 341184

hi khalid the procesador of computer is diferent is good calculate screem but controlator is very fast to embroidery...

in BOLIVIA sudamerica there are embroidery nacional the persons user the machine only needle to manufacture embroiderys of only needle

firts machine is with computer and programer in DOS but this is low in rpm
secunds machina is only with controlator how arduino thi is very fast 1000rpm maximo

sorry for my english my lengua is spanish

i am can help in the machies embroidery i know funtionin and parts mechanical please agreme my face is giomar oscar arestegui torres

[paul3112]

Attachment 341184

hi khalid the procesador of computer is diferent is good calculate screem but controlator is very fast to embroidery...

in BOLIVIA sudamerica there are embroidery nacional the persons user the machine only needle to manufacture embroiderys of only needle

firts machine is with computer and programer in DOS but this is low in rpm
secunds machina is only with controlator how arduino thi is very fast 1000rpm maximo

sorry for my english my lengua is spanish

i am can help in the machies embroidery i know funtionin and parts mechanical please agreme my face is giomar oscar arestegui torres

Hi. If english is not your mother language we can always use google translate. Here I copy and past both english and spanish.
Hola. Si el inglés no es tu idioma materno siempre podemos usar google translate. Aquí copiamos y pasamos el inglés y el español..

Regards
Paul

[giomar]

Attachment 341400

HI DEAR KHALID


1 ROTARY SENSOR OF THREAD: this one detects the thread rupture exists 2 modes
First optical mode with a wheel with holes
Second way is to close a circuit

2 SELENOID; Is activated to turn off the head. In case of thread breakage and back the machine.

3 WIPER EMBROIDERY: pick up the thread when the machine cuts

4 PICKER: Detect the bobbin to make a knot to cut thread.

The 1 and 2 are 2 electronic signals per head if they would be 10 heads would be 20 independent signals

The 3 and 4 always work so the heads are off. Is good for not having many electronic signals.

KHALID IF YOU NEED MORE PLEASE chating for my facebook giomar oscar arestegui torres


Your job is beautiful

[Khalid]

What help u need giomar?

[giomar]

Attachment 342694

please help install
this is error
i have win 10 and visual basic please i need your help Khalid

[den_sibirskiy]

Приветствую всех кто развил эту тему и добился результатов!! Ребята, присоединяюсь к вопросу, где можно взять рабочую версию Gcode Generator Embroidery? Я не смог найти рабочую версию, смотрел везде уже. Спасибо!

[satwaya]

Hey,
Here is the latest version Khalid posted on the forum earlier. I attached the setup and the latest version (you need to replace the .exe)
Hope it'll work for you!

[den_sibirskiy]

Hello!! Thank you very much! I've been looking for. I think I could use that. Wanted to collect stanochek based on the Linuxcnc gcode, now I want to try first this program. Will try to write about the results when they are! Would make a great machine.

[den_sibirskiy]

Sorry, something went wrong

[satwaya]

Well, in this zip you have every .CAB to put in the same folder as the SETUP.exe try if it works

[den_sibirskiy]

The case moved on, but something still wrongAttachment 343814

[satwaya]

I didn't have this problem, try with this setup.exe (I actually have two different setup.exe on my computer for this software). You need to put .CAB in the same folder as setup.exe

[den_sibirskiy]

With your permitions has done as it is said, only afterwards file .exe in file it is necessary to change.
For that to whom too it is necessary will, for the future.
https://yadi.sk/d/7pQOiaOx34AkVE

[satwaya]

Hello,

Did someone tried GRBL on his Arduino or what kind of program are you running on it?

[singh9282]

hello all

I have installed Embroidery Gcode generator but i am facing an issue while saving Gcode.

[satwaya]

Hello,

Try replacing your .exe with the 2.4.8 version in the previous page and retry
Otherwise you can click on "Populate" button on the right and copy the generated GCode on textarea

[Khalid]

Singh,
Did u resolve the problem?

Did you installed Microsoft Access on your computer?

[den_sibirskiy]

Prompt assignment of codes with the letters G, M, F, please.
And why Z adds the value of ten(can be set from 1-20) - what is this option is not clear.
Created a couple of paths in g-code
A video of the process, maybe someone in the future will be interesting
https://youtu.be/YUkPToI5hK0
files https://drive.google...eTBseV84ajZFRHM

Dear Khalid, with your permission, I will post the link to the program I have it working, all you had done, you only need to replace the file .exe in the root program.
https://yadi.sk/d/7pQOiaOx34AkVE
https://yadi.sk/d/66j5Z8DM34PHUm

I offer You my sincere respect and honor for the work you real good, thank you very much, I hope it will be useful.

[singh9282]

Hello

@Khalid, I have installed Microsoft Access Runtime 2010 still not working and same message while using populate button.


Regards
Dilraj

[satwaya]

Hi,

Try removing it and reinstalling it with den_sibirskiy files just above

Let's keep us updated