Hello RUSS,
I cut 17mm MDF, tool: 2 spiral flutes 6mm diameter. 3mm pass depth on MDF with 20000-22000 rpm ... I don't think 3mm on MDF is deep enough to cause a problem for 2.2kw spindle !!!
Sent from my A0001 using Tapatalk
Thread: Spindle stop during cut
Results 1 to 20 of 39
Threaded View
-
12-03-2016, 02:23 PM #4
Junior Member
- Join Date
- Feb 2015
- Posts
- 113
Re: Spindle stop during cut
Reply With QuoteSimilar Threads
-
Machine stop / Spindle Stop with a Dwell
By yaji63 in forum FanucReplies: 2Last Post: 02-16-2014, 06:49 PM -
Doosan Puma - to stop or not to stop? (spindle during toolchange)
By kopsik in forum Daewoo/DoosanReplies: 10Last Post: 12-21-2013, 09:11 PM -
Restarting the spindle after spindle stop while in automatic/tape mode on a VMC
By PhoenixMetal in forum Uncategorised MetalWorking MachinesReplies: 1Last Post: 06-27-2013, 09:11 PM -
Spindle does not stop
By hydrospin01 in forum Colchester Tornado lathesReplies: 1Last Post: 02-03-2011, 06:19 AM -
How can I stop the spindle ?
By tmead in forum Mach Wizards, Macros, & AddonsReplies: 6Last Post: 04-01-2009, 04:50 AM
Tags for this Thread
Posting Permissions
