Ok, that's enough.
Results 1 to 20 of 68
Hybrid View
-
01-10-2017, 07:55 PM #1
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Re: How to Set up a Huanyang VFD and 2.2KW Air Cooled Spindle
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
Configuring Huanyang VFD with air cooled spindle and cheap USB BOB
By kafie1980 in forum Spindles / VFDReplies: 8Last Post: 07-03-2021, 09:02 PM -
Crazy Idea - converting Air Cooled spindle to Water Cooled
By BanduraMaker in forum DIY CNC Router Table MachinesReplies: 19Last Post: 01-20-2018, 02:29 AM -
Spindle 2.2kw water cooled spindle wont work on mach 3 I am new to this.
By estebanpagan in forum Phase ConvertersReplies: 2Last Post: 03-16-2017, 02:16 PM -
Pulley min/max for Huanyang VFD and air cooled 2.2kw spindle
By chrishallowell in forum Spindles / VFDReplies: 2Last Post: 12-14-2016, 02:39 PM -
water cooled spindle vs air cooled
By ken2010 in forum Chinese MachinesReplies: 3Last Post: 10-21-2013, 06:03 PM
Tags for this Thread
Posting Permissions
