Sorry if this is an old many times solved issue. I searched. Im trying to make 9 passes for a profile outline, with .033 z offset on each pass. I cant seem to get this to work. The f70 was just to make the simulation run faster. In reality it would be more like f12.
G90 G00 X0.Y0.Z.3
M98L9
G01 Z0.F7.
G91 Z-.033
G90
G01 Y0.6623 F70.
X-0.0996 Y3.5149
X0.286 Y3.5284
X0.3038 Y3.0193
G03 X0.3241 Y3.0003 R0.0197
G01 X1.0009 Y3.0239
G03 X1.0199 Y3.0443 R0.0197
G01 X1.0021 Y3.5534
X1.3877 Y3.5668
X1.4118 Y2.8763
G02 X1.3774 Y2.7274 R0.2953
G01 X1.3259 Y2.6306
G03 X1.3053 Y2.5412 R0.1772
G01 X1.3561 Y1.0872
G03 X1.3829 Y0.9995 R0.1772
G01 X1.441 Y0.9065
G02 X1.4857 Y0.7604 R0.2953
G01 X1.4961 Y0.4628
Y0.
X1.1457
Y0.5118
G03 X1.126 Y0.5315 R0.0197
G01 X0.3701
G03 X0.3504 Y0.5118 R0.0197
G01 Y0.
X0.
M99
G90 G00 Z.3
G00 X2.5Y7.5
M30
Any help much appreciated.