Quote Originally Posted by w7owc View Post
when you start up MACH3 is the NVEM plugged into you network and powered on? In the box at the bottom of MACH3 next to the red/green reset button it should say connected to the NVEM. sorry I don't know the correct name for this box.
Yes the board is powered on and the router sees both devices connected. It does not say connected to nvem at all but after I reset the system is can use the reset button to reset mach3. Plus the pin that has my probe hooked up to it lights up when I engage the probe but this is all hooked up to the board. It just seems that there is no communication from the computer to the board