Open the attached main.plc file in windows notepad and compare to what you have. Do not try to copy this file into your control you can only compare it and make manual edits if you need to. The picture of the screen you sent is normal.
Robert Varney,
Application Engineer
MAG IAS
Global Services
1780 Worldwide Blvd.
Hebron, Ky 41048
U.S.
tel: 859-534-4748
fax: 859-534-4999
mobile: 513-375-1059
Results 1 to 20 of 39
Hybrid View
-
03-24-2017, 06:07 AM #1
Registered
- Join Date
- Jul 2005
- Posts
- 107
Re: Cincinnati Arrow error 9036 HELP!
-
03-24-2017, 06:13 AM #2
Registered
- Join Date
- Jul 2005
- Posts
- 107
Re: Cincinnati Arrow error 9036 HELP!
On your pc put a copy of cnc_com in a directory\folder by itself. Start cnc_com in a dos window\dos prompt. In file maintenance go to copy file. In there you will see copy from and copy to.
Copy from C;main.plc
Copy to I:main.plc
Copy in ASCII.
The RS232a port is drive I and the RS232b port is the J drive.
Robert Varney,
Application Engineer
MAG IAS
Global Services
1780 Worldwide Blvd.
Hebron, Ky 41048
U.S.
tel: 859-534-4748
fax: 859-534-4999
mobile: 513-375-1059
Reply With QuoteSimilar Threads
-
Arrow 750 with CT control error message 9036
By DEAN-O in forum Cincinnati CNCReplies: 6Last Post: 02-11-2019, 01:17 AM -
error 9036 static RAM file system corrupted in cincinnati arrow 500 1994
By moh azizz in forum Cincinnati CNCReplies: 0Last Post: 11-25-2013, 02:13 PM -
New Cincinnati Arrow owner with servo error
By mvas82 in forum Cincinnati CNCReplies: 12Last Post: 06-19-2013, 10:13 PM -
Cincinnati milacron 750 arrow error msg
By A1 roper in forum CNC Machining CentersReplies: 1Last Post: 02-11-2011, 02:24 PM -
Cincinnati Milacron Arrow 750 Error Message
By Nikon Phil in forum CNC Machining CentersReplies: 6Last Post: 02-11-2011, 12:08 PM
Tags for this Thread
Posting Permissions
