Link Below to the files that the supplier sent me
https://drive.google.com/file/d/0B0A...ew?usp=sharing


Below are are few examples of what i have done i with it.
It was running fine for a few weeks but developed a glitch where it seems to miss a block of code and then tries to shoot off to the start of the next block.
This is on all code from a basic circle to the NVEM mounting plate below.

Fix one problem and find another.

Got the below to cut out ok. Lost one set due to a glitch


Examples below




Pic of mach3. It knows that its out of alignment but just keeps going. Seems to be missing a block of code and its so inconsistent i can't pin point it.
All i know is that tuning the motors to 25000 velocity and 2000 acceleration has made it so i can at least run again.


Also worth noting that once the above has occurred i can zero of run from a specific line of code and it will cut in the exact path it should unless it glitches again.
It seem to go into a gitter as it tries catch its self up.