Attached is an example of a model im trying to machine at work using Solidworks and HSMEXPRESS, but am trying to figure out in my spare time at home how to approach it with Fusion. I'd like to use 2d adaptive clearing on the "dogbone" pocket to the right but it just doesn't properly recognize the geometry even when I select just the bottom edge contour. I feel the step in heights and overlap to the left pocket is part of the issue. Using Hsm I think I got past the issue with the use of the propagate along z check box but honestly don't know what that meant and can't remember now. Fusion doesn't have that propagate option, nor machine cavities. In Fusion, both 2d contour and pocket work easily but I believe they gave me trouble in HSM initially.

As reference, the slot is .24" wide, the corners are 1/8" diameter, and I'd like to use an 1/8" endmill for the 2d adaptive machining (but plunging/drilling the corners out first)

Thanks.

Sent from my VS985 4G using Tapatalk