Hello....
I'm looking for a simple software and post processor for the Rover C6 any recommendations??? http://www.cnczone.com/forums/images/icons/icon7.png
Hello....
I'm looking for a simple software and post processor for the Rover C6 any recommendations??? http://www.cnczone.com/forums/images/icons/icon7.png
If you get any version of VisualMill, Mecsoft will configure a post-processor for free, if your machine isn't already on the list of posts https://mecsoft.com/downloadposts/ (I'm not seeing one for the Rover). All you need to supply is a sample of G-code that works on your machine; they'll do the rest. And if you want a discount on the software, let me know.
I'd check out one of the cabinetmaking or woodworking CAM products... IIRC Biesse has some crazy g-code language...
Thank you guys let me check out the Visualmill software and see if its a good fit for the machine.
Your help is much appreciated.
What are you using the machine for? That has a lot to do with what software you use.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
TopSolid... I know one shop nearby that uses it...
I do a lot of work with a shop that uses TopSolid. They have a couple seats, and about $40K into it.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Hey,
its a 5 axis machine and its quite difficult for me to program 3D drawings and angle cuts.
For now i'm using it to cut some complex cuts for ridge beams and trusses.But in general i'll be doing windows and doors.
There's no such thing as "simple" 5 axis software.I'm looking for a simple software ...........................
........................... its a 5 axis machine
My suggestion would be MasterCAM Router or AlphaCAM Router.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
The software that came with the machine is biesseworks.
Its quite tricky to do 3D drawings in biesseworks.
Hi, Have you talked to BiesseUK about the software?
They could help, even upgrade your machine to the newer bSolid software now being shipped with their machines.
Alphacam and Biesse are very very nice pair,,,
mastercam is iffy