587,747 active members*
3,140 visitors online*
Register for free
Login

Thread: Smallish aluminum and brass pieces

Results 1 to 2 of 2
  1. 06-01-2017, 03:44 PM #1
    Erik D_lux
    Erik D_lux is offline Registered
    Join Date
    Nov 2010
    Posts
    64

    Smallish aluminum and brass pieces

    I am looking for approx 100-300pcs depending on cost. Most will be from 360 brass and the rest from 6061 aluminum

    +/- .002 except the center .063 holes that need to be kept within .0005 since they are fit for bearings.

    Please let me know if you have questions. I can be reached at [email protected]. I dont check the PM's on here, I am not sure why but the website is always really, really slow to load making it hard on me to check on them.
    Reply With Quote Reply With Quote
  2. 06-14-2017, 05:27 PM #2
    Erik D_lux
    Erik D_lux is offline Registered
    Join Date
    Nov 2010
    Posts
    64

    Re: Smallish aluminum and brass pieces

    Job has been awarded. Thanks!
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. RFQ - Brass turning two parts 2000 pieces each.
    By R1_pilot in forum North America RFQ's
    Replies: 9
    Last Post: 07-20-2015, 04:21 PM
  2. RFQ: 100 pieces brass disks.
    By tskguy in forum North America RFQ's
    Replies: 9
    Last Post: 02-07-2013, 03:41 PM
  3. Brass pieces to be cut or stamped.
    By Ty G in forum North America RFQ's
    Replies: 0
    Last Post: 10-14-2012, 07:37 PM
  4. 60 aluminum pieces
    By 387designs in forum Employment Opportunity
    Replies: 7
    Last Post: 08-07-2009, 12:55 AM
  5. RFQ- Aluminum pieces
    By pinkertonmax in forum Employment Opportunity
    Replies: 8
    Last Post: 11-19-2008, 07:30 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules