Re: Mastercam Planes
He is using the wrong post kinematics of the machine. this is a A and C axis. Is this machine a Head < Head setup? as setting up the angle in 3+2 for this is easy. but if you are running the wrong machine def and post it may output different for sure. With a solid as show in you sample picking the gnomon and the face will set the Z in one click. you may need to swing the X or Y based on the machine kinematics.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .