I use featurecam from 3 years.....in the win xp task menager the cpu % used from featurecam don't go up 50% in all the work i made.... when i'm doing a 3d parts the program is slow....
Any answer???
Sorry for my english
I use featurecam from 3 years.....in the win xp task menager the cpu % used from featurecam don't go up 50% in all the work i made.... when i'm doing a 3d parts the program is slow....
Any answer???
Sorry for my english
I think you will find that is more a function of your graphics card than CPU. Tom's Hardware just did a comparison and you can get a powerful 3D card for $100 now. http://www.tomshardware.com/2006/09/...for_the_money/
If you have a dual core processor, you usually will never see more than 50% use in task manager. If the display is slow, than I'd also say video card. If toolpath generation is slow, then it's either RAM or processor.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
All excellent points.