It does have the 10 tool Umbrella style changer.

If all I ever had was 10 tools, then I could keep the same 10 tools and have the pockets match. I am starting out with 15 tools. One of those is the Haimer and it will not get stored in the ATC.
My Pulsar has 25 tools to handle our production products and a few that are for R&D stuff.
Everything we do will be done in Fusion 360. This is where the tool library is stored and used with the CAM to create the Gcode for the MM. The actual tool number is derived from that library. It's location in the pocket needs to correlate with that number. Hope I am explaining it right.