587,106 active members*
3,918 visitors online*
Register for free
Login

Thread: Puma 700 dnc-cable

Results 1 to 2 of 2
  1. 10-16-2006, 06:15 PM #1
    jani
    jani is offline Registered
    Join Date
    Aug 2006
    Posts
    20

    Puma 700 dnc-cable

    Usually dnc-cable is connected to rs-232 connector on right side of control panel.
    Am I right that rs232 cable goes directly to electric cabinet behind machine? If it goes, then it might be possible to connect dnc-cable directly to rs232 cable inside electric cabinet.
    I am just curious to hear if someone is done that and is it easier that way or draw cable to control panel same way as other control cables are draw?
    Reply With Quote Reply With Quote
  2. 10-19-2006, 10:25 AM #2
    Green Button
    Green Button is offline Registered
    Join Date
    Sep 2006
    Posts
    222
    We have connect it directly to el. cabinet. There is just wire between control cabinet & el.cabinet.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules