[Need TECH Help!]

This should fix the spindle not restarting for your machine.

Are you using a custom file to halt or reset program? Dont forget to add that line of code in from the reset file i posted.

That fixed the restart at second hole issue. What was the change in code to fix that?

Yes I added the rest code to my halt program.

The feedhold and resume ccode programs still cause the spindle to lose sink with z axis when actions are set for factory pause button.

[mmurray70]

That fixed the restart at second hole issue. What was the change in code to fix that?

Yes I added the rest code to my halt program.

The feedhold and resume ccode programs still cause the spindle to lose sink with z axis when actions are set for factory pause button.

The first time the spindle starts in the rigid tap program it simply sets the CW bit. Your machine runs a little different and needs to clear the CCW bit and then set the CW bit. So i changed it out to match your machine.

Your welcome for the help. I had alot of help from others last fall when i was doing my machine, so nice to be able to give back a little now that i understand things a little better.