[abuhafss]

Hi

I am a newbie here.

I need to mark logos on metals like iron, cast iron and aluminum alloy.
I am considering to buy 10W or 15W laser module as shown here

https://www.aliexpress.com/item/15W-...02.4.76.rRqSHw

I just want to be sure if it would do the job?
Is the cooling from the fan would be enough or I might need some extra arrangements?

Thanks.

[wmgeorge]

It might burn the anodizing off aluminum with a long time span but for steel not sure about cast iron you need a Galvo Fiber laser of at least 20 Watts. Around $5000 USD.

[laserliu]

Hi

I am a newbie here.

I need to mark logos on metals like iron, cast iron and aluminum alloy.
I am considering to buy 10W or 15W laser module as shown here

https://www.aliexpress.com/item/15W-...02.4.76.rRqSHw

I just want to be sure if it would do the job?
Is the cooling from the fan would be enough or I might need some extra arrangements?

Thanks.

Hi abuhafs ,

for fiber laser makring machine for metals,

dear we have 10w 20w 30w etc,
and makring range from 100*100mm 150*150mm, 200*200mm,,
if oyu need 10w then makring range with 100*100mm is best, for more larger working area then more worse the makirng effect,
here is some phots of our factory and some photos of makring machine, :

for more news can you add me:
watsApp:8615698041856
skype:wkquiven
[email protected]

[RoseChina]

Hi

I am a newbie here.

I need to mark logos on metals like iron, cast iron and aluminum alloy.
I am considering to buy 10W or 15W laser module as shown here

https://www.aliexpress.com/item/15W-...02.4.76.rRqSHw

I just want to be sure if it would do the job?
Is the cooling from the fan would be enough or I might need some extra arrangements?

Thanks.

Hello. MORN® fiber laser marking machine is suitable for you. It's Affordable and Durable. Please check this listing page, you will meeting your machine.

http://www.morntech.com/laser-markin...g-machine.html