[RCaffin]

On the inside???
OK, that's new.
LONG shank with ball end and come up through hole in bottom of egg? Still with only 3 axes?
Or large egg and right-angle dental drill?

Cheers
Roger

[uvvvvw]

Hi Roger, good to see you through the internet again

On the inside???
(yes)

LONG shank with ball end and come up through hole in bottom of egg?
(normal 0.2mm flat tip 30 degree engraving bit. not really long shank one. not a hole in the bottom, but a big hole in the back. you can see it in the 3rd pic)

Still with only 3 axes?
(yes, same machine)

Or large egg and right-angle dental drill?
(normal 90mm long goose egg. not right-angle one, just normal spindle. i use a brushless DC spindle)

CK
==

[RCaffin]

Ah - I see. Very clever too.

Cheers
Roger

[uvvvvw]

Another Assyrian egg

[uvvvvw]

Some chicken eggs

[uvvvvw]

My favorite Dinosaur Baby