[vavalves]

Dear All
I need urgent help!!

We recently bought a used Toyoda FA 550 with fanuc 15m with alpha drives from UK.

When we power on this machine the system is not getting ready it shows this message:

F15M14 A0C20
?

I P L
1. DUMP MEMORY
2. SET FILE
3. CLEAR FILE
4. FILE
5. SETTING
6. END IPL
?

Can anyone help how to resolve this problem.

need an urgent help and response.

Thnx

vishal jain

[memoryman]

First, you have lost ALL volatile data, such as parameters, programs, offsets. You have to have these to restore.
As guhl asks, what happens when you exit IPL by pressing 6 and enter?

[vavalves]

when i press 6 and enter it gives same message again as i notified earlier.

Can anyone help me for giving this volatile data as i need system data to ready the system and the parameters i have got from the machine supplier.

but he does not have system data to ready system.

[memoryman]

That means that the control has to be powered up holding the 7 and 9 keys pressed until you see the control clearing data. Then, after exiting the IPL screen, you should get a "normal" screen with many alarms, because the parameters are gone.