Originally Posted by
ryan99yz
UPDATE:
I found a solution to my problem. Unfortunately I tried to contact auto cad for tech support. Found out when you buy a Tormach, you get a one year "trial". Trials do not include support, but if you purchase it... the trial ends. Highly disappointing. I also noticed a few things. The additional offset is key, lol. Also the up and down milling were effecting the x axis and I was hoping to effect the Y axis. One way and other were doing the same thing and it threw me off. If it can be messed up, Ill mess it up. There was also some very good tips in the comments of the video posted.
On to the solution. I was rotating the blade 180 degrees on the X axis, rotated it on the Y axis and it works the way I expected. So overall I was unable to choose ramp because the parallel operation doesn't offer that. But I was able to adjust my vertical lead in radius' and everything looks good in simulation. I will update once everything comes together if interested?