That is a good question, i dont know if it is analog or digital....
It looks like the previous owner did convert it to Mach 3, and right now it is running a DMC-4153 motion controller, i will have to check the servo drivers
I cant find a lot of information on the motion controller (meaning here on the forum) but it is a Ethernet motion controller.
View Poll Results: Which Software?
- Voters
- 59. You may not vote on this poll
-
Mach 3/4
10 16.95% -
UCCNC
26 44.07% -
Linux CNC
23 38.98%
Thread: Mach 3/4 vs UCCNC vs Linux CNC
Results 1 to 20 of 28
Hybrid View
-
11-02-2017, 07:27 PM #1
Registered
- Join Date
- Dec 2005
- Posts
- 141
Re: Mach 3/4 vs UCCNC vs Linux CNC
Reply With QuoteSimilar Threads
-
Swap Mach 3/ESS for UCCNC/UC300ETH-5LPT on CRP PRO with Plug and Play Electronics
By skrap853 in forum Avid CNCReplies: 76Last Post: 03-27-2023, 11:26 PM -
Deciding on my new controller for my build. Mach 4, EdingCNC, flashcut UCCNC?
By LazyMan in forum Controller & Computer SolutionsReplies: 30Last Post: 03-19-2018, 10:21 PM -
Mach3, Mach 4 or Linux CNC for G0704
By Bearhawk LSA in forum Benchtop MachinesReplies: 151Last Post: 06-04-2016, 03:35 PM -
Mach 3 vs. UCCNC- any thoughts / experience ?
By RMiroC in forum Mach Software (ArtSoft software)Replies: 2Last Post: 06-01-2015, 08:59 PM -
Mach 3 vs Linux Cnc
By tamartin in forum Benchtop MachinesReplies: 17Last Post: 01-29-2013, 02:23 AM
Tags for this Thread
Posting Permissions
