If it's a halfway decent laptop, it shouldn't be a problem at all.
- - - Updated - - -
No, the Smoothstepper is Mach3 only.
For UCCNC, you want a UC400ETH or UC300ETH.
Results 1 to 20 of 37
Hybrid View
-
12-06-2017, 04:12 PM #1
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Re: Bought a laptop to run cnc , now hear it’s a bad choice :(
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
12-06-2017, 08:55 PM #2
Registered
- Join Date
- Mar 2017
- Posts
- 164
Re: Bought a laptop to run cnc , now hear it’s a bad choice :(
Thanks for the heads up.
Originally Posted by ger21
I cant find your old post , but I thought you had posted one for UCCNC . It was the post where you did a nice job of shortening all the jumpers that go to the board beneath it .
i have to start studying again , as I’m forgetting all my terminology
Similar Threads
-
HP 8440P Laptop & UC-100 & UC CNC Software Or Mach3 Your Choice...
By storm2313 in forum For Sale OnlyReplies: 0Last Post: 04-21-2015, 08:28 PM -
Ever hear of. . .
By hydrospin01 in forum Uncategorised MetalWorking MachinesReplies: 4Last Post: 05-04-2007, 06:29 PM
Tags for this Thread
Posting Permissions
