Hello everyone. Just received my CNC Router Parts Benchtop PRO 2436 via UPS all in order, 8 packages weighing in at 285 lbs. Everything well packed and secure. I
opened all packages and put all axis's on top of my router frame. Since this is a kit I will thoroughly check everything.The axis's come pre assembled. I will start with the Z axis first as it is the
smallest and easiest to work with. I removed the dust covers and placed it on my surface plate on top of two 1-2-3 blocks and started indicating. I had found that the router mounting plate is out of parallel with the frame by .032 in 14" and off by .040 in 14"on the side. So I will completely disassemble, square it all up and re assemble.