[kampucci]

Hello All,
I am Kampucci from Germany
im new to business and i hope to find all what i need here.

[davidm1519]

Good afternoon everyone, hope everyone is enjoying their Tuesday. I work at a custom commercial kitchen equipment fabrication shop. We fabricate and install custom S/S equipment. We cut CRS & Mild steel along with various gauges of stainless. All with a Mitsubishi ML3015 LV Plus II. We draw in Autocad & generate our code and laser settings in metacam Diamondsoft-EX vers. 5

[HMFIC]

Hi everyone. My name is Kevin and I enjoy making things with my CNC Plasma table in beautiful Colorado.

[FL1PP3R]

Hi, I'm brand new member to these forums.
I have some experience with a Roland EGX-600 and its associated software, and am in the process of designing my own DIY cnc at home with Autodesk Fusion 360.
I'm looking forward to drawing o the knowledge base here for the design of my machine.

[WoodenYouKnow]

Hello. My name is Mark and my wife and I have a two-year-old business making Crokinole and Cornhole Game Boards. I have been doing all the routing by hand and as our business is growing (introducing Crokinole to the southeastern U.S.A.!) I am looking for the right CNC Router so I can speed up operations. I machine 1/2 and 3/4 inch 5 X 5 and 4 x 8 sheets of baltic birch plywood, plus small parts from sapele, red oak, and walnut,, and a few other woods. I hope to get into in-lay with the CNC also.

As I have searched and called several CNC router companies, I have found some conflicting advice on things such as servo-motors vs. steppers, rack & pinion vs. ball screws, and lquid-cooled vs. air-cooled spindles, etc. Can someone direct me to the appropriate forum(s) within this site where these basic things are discussed. I would greatly appreciate that. I look forward to learning from (and perhaps someday contributing to) this site. Thank you in advance.

[feret81]

Hello people of the cnc world.
I am a cnc hobbyist and have just bought a cincinatti arrow 750 to have some fun on. Also getting my head around fusion 360.

live over in sunny England 🤥
Keith

[tishihtzu]

Hello all. I am a CNC NOOB. I am building an Openbuilds CNC mini mill with planet-cnc USBControllerMk3/4. I still have not worked the kinks out so hoping to get some guidance on that here.

[IrishMoss]

Hi, Jeff from Georgia here. Currently my eyes are bleeding from endless googling and youtubing CNC topics. Also think I may be nearing the max open tabs limit in my browser... too afraid to close them as I may never find that information again.

In any event, I am slowly making progress. Just got my stepper motors spinning under linuxcnc. woohoo! Now to figure out this damn relay...

[number000073]

Hello everyone,, if I can do anything to help please let me know. Programmer C++ ,assembly , Visual basics ,,

keysoftwareservice.com

[2-Wheel]

Hi, I'm Toby andI am a CNC operator by profession. And CNC milling is also a hobby for me.Greetings from Switzerland
Hi, I'm Toby andI am a CNC operator by profession. And CNC milling is also a hobby for me.greetings from Switzerland

[mbrembati]

Ciao! My name is Marco and I live in Rome, Italy.
I'm entering the CNC world with at 50 yo, with a mechanical engineering background and a life spent in the IT. Last year I bought a chinese 3D printer kit and this year I used it to build an MPCNC. I've been given an old small lathe and now that I have discovered the power of GRBL and CNC shield I'd like to upgrade it to CNC at nearly no cost. I'm a pure hobbyist, I'm not interested in making any money on my works, and will always try to keep costs as low as possible and to repurpose anything I have!

[moumouh206]

Hello everyone,, if I can do anything to help please let me know. Programmer C++ ,assembly , Visual basics ,,

[watahyahknow]

hi all ronald from the netherlands , not employed in the field just sharing a common interest in cnc

[eddie10]

hi I'm Ed technician from Philippines

[zmtech]

Hello there, CNC programmer/servician here!

[Cyberave68]

Hello Cyber here, new hobbyist trying to learn more....

[Jstaud]

Hi there,

I'm a novice CNC machinist and currently use a HAAS VF2 at a local makerspace to create parts! Looking to learn more.

- James

[Blockerra]

Hello! By day I am currently employed as an NC Programmer for TruPunch and Finn-Power sheet metal punching machines. By Night I run an OpenBuilds MiniMill with 175oz-inch steppers and chinese no-name controller. Apart from CNC work I run a side business that does odd jobs (part replication, short run manufacturing).

[cncbeard]

Total newb, just called in to say Hello.

[abuelkasem1]

Hello Guys, I'm Abuelkasem , mechatronics engineer from Egypt, I work with automation control systems including CNC retrofitting & building