Fanuc has put out a bit of mixed information on this front. The maintenance manual seems to indicate that servo version 9040 would be correct for either A/B or serial encoders, but other documentation I've come across seems to indicate that 9040 is only for serial encoders. Can anyone clarify this?
Results 1 to 5 of 5
Threaded View
-
01-22-2018, 08:02 PM #3
Registered
- Join Date
- Jan 2006
- Posts
- 177
Re: 0MC (486DX2 High Speed Version) with A16B-2200-0390 Axis card and A/B Encoders
Reply With QuoteSimilar Threads
-
Mechanism techniques used for a high speed z axis
By shreifali in forum Linear and Rotary MotionReplies: 3Last Post: 11-09-2014, 06:32 PM -
information about card A16B 2202 0720
By cucca in forum FanucReplies: 0Last Post: 11-01-2012, 09:21 AM -
X-axis chatter at high speed travel
By tjamscad in forum FadalReplies: 1Last Post: 07-25-2012, 03:15 PM -
High-Speed 3 (4?) axis cnc router
By rherman in forum DIY CNC Router Table MachinesReplies: 29Last Post: 10-21-2005, 04:31 AM
Tags for this Thread
Posting Permissions
