The stepper system input voltage is limited by the drives not the motors. In other words, feed them with the voltage your drives will take. I'm running mine at 75 and 80 volts depending on the machine. Running NEMA 23s and 34s, all 4 wire.
Thread: Too much voltage?
Results 1 to 17 of 17
Threaded View
-
01-28-2018, 07:37 AM #2
Community Moderator
- Join Date
- Dec 2013
- Posts
- 5716
Re: Too much voltage?
Jim Dawson
Sandy, Oregon, USA
Reply With QuoteSimilar Threads
-
Help..Stuck at relay ext dc voltage missing but dc voltage OK ?
By Dirky in forum Bridgeport / Hardinge MillsReplies: 26Last Post: 05-14-2021, 06:39 PM -
Low Voltage vs High Voltage Stepper motors?
By Brian_M in forum Stepper Motors / DrivesReplies: 28Last Post: 06-21-2017, 07:29 PM -
Chopper drive max voltage vs max voltage of Nema23
By K_G_B in forum Stepper Motors / DrivesReplies: 5Last Post: 07-11-2014, 04:17 AM -
High voltage power supply, low voltage perihperals
By feechl in forum CNC Machine Related ElectronicsReplies: 2Last Post: 01-07-2014, 02:12 AM -
Precix 9100 Controller - VI voltage issue Voltage range only 6.5 to 10Volts
By wdysf150 in forum Controller & Computer SolutionsReplies: 0Last Post: 08-15-2013, 08:24 PM
Tags for this Thread
Posting Permissions
