davy182 
I was looking around a few weeks ago for an accurate tape measure, and found that there are class 1 and class 2 tape measures. The vast majority are class 2.
https://www.thetapestore.co.uk/knowl...e_Measure.html
Thread: Machine precisely off.
Results 1 to 12 of 12
Threaded View
-
03-14-2018, 04:08 PM #10
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35494
Re: Machine precisely off.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Similar Threads
-
Should the table be precisely level?
By pitbuilder in forum DIY CNC Router Table MachinesReplies: 8Last Post: 10-04-2010, 11:47 AM -
Marking and drilling steel precisely
By FandZ in forum MetalWork DiscussionReplies: 18Last Post: 12-23-2008, 03:21 PM -
Zeroing Precisely
By LenMcC in forum TorchmateReplies: 4Last Post: 07-21-2008, 05:34 PM -
Precisely measuring a right angle
By bilinghm in forum Benchtop MachinesReplies: 12Last Post: 01-30-2008, 06:14 AM -
Mounting a timing pulley - Precisely
By harryn in forum MetalWork DiscussionReplies: 24Last Post: 09-05-2007, 11:46 PM
Tags for this Thread
Posting Permissions
